Phone
WhatsApp
Email

Industry News

 

1250KVA Dry Type Transformer And Price

03-17 2025 | By:

SCB10-1250KVA dry-type transformer is a conventional dry-type transformer with a voltage ratio of 10/0.4KV and a size of 1690*1150*1900. More parameters are as follows:

Capacity: 1250kva.

Weight: 3700kg.

Length: 1690.

Width: 1150.

Height: 1900.

More introduction to SCB10-1250KVA dry-type transformer:

Dry-type transformers are widely used in local lighting, high-rise buildings, airports, docks, CNC machinery and equipment and other places. Simply put, dry-type transformers refer to transformers whose cores and windings are not immersed in insulating oil.

Structural type, mainly composed of a core composed of silicon steel sheets and a coil cast with epoxy resin. An insulating cylinder is placed between the high and low voltage coils to increase electrical insulation, and the coils are supported and constrained by pads. The fasteners of the overlapping parts have anti-loosening properties.

Characteristics, dry-type transformers are often used in places with high requirements for fire prevention and explosion-proof performance due to their strong short-circuit resistance, low maintenance workload, high operating efficiency, small size, and low noise.

1. Safe, fireproof, pollution-free, and can be directly operated at the load center;

2. Adopting domestic advanced technology, with high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability, and long service life;

3. Low loss, low noise, obvious energy-saving effect, and maintenance-free;

4. Good heat dissipation performance, strong overload capacity, and can increase capacity operation when forced air cooling;

5. Good moisture-proof performance, suitable for operation in high humidity and other harsh environments;

6. Dry-type transformers can be equipped with a complete temperature detection and protection system. The intelligent signal temperature control system can automatically detect and display the operating temperature of each three-phase winding, automatically start and stop the fan, and have alarm, tripping and other function settings;

7. Small size, light weight, small footprint, and low installation cost.


SCB10-1250KVA dry-type transformer working environment:

1.0 – 40 (℃), relative humidity <70%;

2. Altitude: no more than 2500 meters;

3. Avoid exposure to rain, moisture, high temperature, high heat or direct sunlight. The heat dissipation vents should be at least 40cm away from surrounding objects;

4. Avoid working in places with corrosive liquids, or gas, dust, conductive fibers or metal shavings;

5. Avoid working in places with vibration or electromagnetic interference;

6. Avoid long-term inverted storage and transportation, and avoid strong impact.

The prices of 1250KVA dry-type transformers are divided into copper and aluminum. The conventional models are divided into SCB10-1250KVA dry-type transformers, SCB11-1250KVA dry-type transformers, SCB12-1250KVA dry-type transformers, and SCB13-1250KVA dry-type transformers. The prices range from RMB 45,000 to RMB 130,000. Please contact +86 16650273776 for inquiries.











Request for Question