10kV 3Phase Copper /AL Dry Type Cast Coil Resin Type Transformer

Features

SCBH15 amorphous alloy dry-type transformer is a liquid metal with appropriate composition.The alloy obtained by rapid solidification at a cooling rate of about one million degrees Celsius per second has an amorphous atomic structure similar to glass and superior soft magnetic properties because its atoms have solidified before crystallization.

The iron core of amorphous alloy transformers is made of amorphous alloy. Amorphous alloy materials have a disordered amorphous state of the metal atoms and a lower loss than the silicon steel core, achieving high efficiency and energy saving. The area enclosed by the hysteresis loop of the amorphous alloy is much smaller than that of the cold rolled steel sheet, so the hysteresis loss of the amorphous alloy is much smaller than that of the cold rolled silicon steel sheet and its core loss is very low about 70%lower than the no-load loss of traditional silicon steel sheet ironcore transformers, Amorphous alloy transformer is an ideal low-loss and energy-saving transformer. Due to low loss, amorphous alloy transformers generate less heat, have low temperature rise, and have very stable performance.

Advantages

1. Ultra-low loss characteristics, energy saving, high power efficiency;

2. The amorphous alloy material uses lower energy and its ultra-low loss characteristics during manufacturing, which can greatly save electricity consumption and reduce the power generation of power plants, relatively reduce the emission of SO2 and CO2 waste gas, reduce environmental pollution and greenhouse effect, maintenance-free, pollution-free;

3. Low operating temperature, slow insulation aging, and long transformer service life;

4. High overload capacity and high mechanical strength;

5. When the amorphous core passes through a higher frequency magnetic flux, it still has the characteristics of low iron loss and low excitation current without causing the problem of core saturation. Therefore, the SCBH15 amorphous alloy dry-type transformer made of amorphous core has good harmonic resistance;

6. Fast investment recovery benefits;

Regular  Service  Conditions

a    The Elevation  (m. a. s. l. )is  below  1000m;

b    Ambient  temperature;

C    Highest  ambient  temperature  +40℃;

d    Highest  daily  average  air  temperature  +20℃;

e     Lowest  outdoor  ambient  temperature  -25℃;

Dry Resin Cast Transformers FAQ:

1. What certificates do your transformers have?

CE, ISO, Test certificates.

2. What is the capacity of the transformers you provide?

50-20000kva. We can provide customized services for various transformers within the range!

3. How long is the warranty period of the transformer?

We provide a 12-month warranty period.

4. How long is the delivery time and delivery time of the transformer?

After receiving the advance payment, the production cycle is 15-25 days. The transportation cycle should be calculated according to your region and mode of transportation.

5. Which countries do you export your products to?

We support global supply, and our products have been exported to more than 60 countries, Southeast Asia, the Middle East, South America, Africa, Americas